VANOCE | String Art Flat Ball, Christmas Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The flat string art ball from my collection of Christmas Tree decorations.
- Ocena
- 4,947 / 5
- Polubienia
- 280
- Pobrania
- 1465
- Wydruki
- 18
- Wyświetlenia
- 5172
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
VANOCE | String Art Flat Ball, Christmas Tree
The flat string art ball from my collection of Christmas Tree decorations.
It prints 100% without supports, despite the strings floating in mid-air. Just make sure to check the recommended 3D print settings below.
My Christmas collection comprises:
- a tree top star of course, in string art style And 6 hanging accessories:
- 3D string art balls
- Flat christmas tree themed ball, in string art style
- Small **3D stars, in string art style
- Pine cones
- Little 3D trees
- Fast-printing snowflakes
Happy printing!
DIMENSIONS | Ø 112 mm x D 7 mm
3D PRINT SETTINGS:
The flat ball prints flat.
The STL file is already oriented properly
No supports needed.
No adhesion brim needed.
The only trick is to set the layer height to 0.3mm.
You may have to set the "line width" to about 0.42mm and the "overhang speed" to 30mm/s. This is by default in Bambu Studio, but you may have to set it manually if you use other slicers and printers.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.
Wall line count: 2
Layer height: 0.3mm/layer or less
Infill: 15%
Build adhesion type: None
Supports: None