Monitor Befestigung Logitech Brio / Logitech Brio monitor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Halterung für Logitech Brio Webcam für stabilen und einfachen Justierung / Webcam Holder for stable and easy adjustment
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
for english see below

Kamerahalterung
Der zur Logitech Brio mitgelieferte Halter gefällt mir nicht. eine stabile Montage am Monitor gelingt mit damit nicht. Meine Monitore sind an einer Zentralen Monitorhalterung (35 mm Säulendurchmesser) befestigt, folglich bietet sich auch eine Montage der Kamera an dieser Säule an.

Die Kamerahalterung besteht aus 3 Teilen:
- Die Kamera wird einfach in das Gehäuse eingeklinkt
- Das Gehäuse wird mittels M6x40 Schraube und einer M6 Flügelschraube oder der später beschriebenen Rändelmutter an der Halterung beweglich befestigt.
- Die Halterung und die Gegenklemme werden mit 2 M6x50 Schrauben und Flügel- bzw. Rändelmuttern am Stahlrohr beweglich montiert.

Rändelmutter
Ihr könnt eine M6 Flügelschraube verwenden oder euch selbst eine Rändelmutter erstellen:

Pro Rändelmutter wird eine M6 Mutter benötigt, Diese wird in die Rändelmutter eingepresst und (optional) mit der Kappe verschlossen (eventuell 1 bis 2 Tropfen Gel-Sekundenkleber verwenden)

Bauteile
Ihr benötigt:
- 3 Schrauben M6 x 45 oder länger (z.B: https://amzn.to/3ZGpc3M )
- 3 Muttern M6 z.B: https://amzn.to/3VRRypx oder
- optional 3 Flügelmuttern M6 z.B: https://amzn.to/41ovq9N
Ich habe mich beim Amazon Partnernet registriert, verdiene daher als Amazon-Partner an qualifizierten Verkäufen und bedanke mich daher, wenn ihr die Links nutzt.
Achtung: Die oben genannten Beispiele sind Standardbauteile: In diesem Fall habe ich die Teile NICHT getestet, da ich Sie in meiner Baumarkt Schraubenkiste bereits vorrätig hatte
English
Camera holder

I don't like the holder supplied with the Logitech Brio. I can't mount it stably on the monitor with it. My monitors are attached to a central monitor mount (35 mm column diameter), so the camera can also be mounted on this column.

The camera mount consists of 3 parts:
1. the camera is simply clipped into the housing
2. the housing is attached to the mount using an M6x40 screw and an M6 wing screw or the knurled nut described later.
3. the bracket and the counter clamp are movably mounted to the steel tube using 2 M6x50 screws and wing nuts or knurled nuts.

Knurled nut
You can use an M6 wing bolt or make your own knurled nut:
One M6 nut is required for each knurled nut, this is pressed into the knurled nut and (optionally) sealed with the cap (use 1 to 2 drops of power glue if necessary)

Components
You need:
- 3 Screws M6 x 45 oder länger (z.B: https://amzn.to/3ZGpc3M )
- 3 Nuts M6 z.B: https://amzn.to/3VRRypx oder
- optional 3 Flügelmuttern M6 z.B: https://amzn.to/41ovq9N
I have registered with the Amazon partner network and therefore earn money as an Amazon partner from qualified sales. Thank you for using the links.
Caution: The above examples are standard components: In this case I did NOT test the parts as I already had them in stock in my DIY store screw box
