4 inch flex dust collector hose quick disconnect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a quick way to swap my dust collector from one mobile tool to another.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 460
- Wydruki
- 2
- Wyświetlenia
- 1905
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit my hose and the tools. The threaded part on the original had a square end the snagged the plastic, making it nearly impossible to attach it to the hose. I fix that with a tapered end to the thread. The part that fits over the port on the tool was way too big and had to be reduced. I am providing the SketchUp (SKP) file if you want o modify it.
I will also be posting a dust collector port that will fit nicely with this quick disconnect. I designed it for a tool that did not have one.