Electrolux/AEG/Ankarsrum Dough knife adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dough knife adapter for N-series stand mixers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the dough knife is no longer sold as a spare part for machines older than N24 (-05) i had to make this adapter so that i could use the new knife (920900019) as a replacement.
It's not a 1:1 replacement since the angle of the knife is a bit more aggressive (about 10 degrees).
I have only tested on N22 but im guessing it will work for all N- models.
For more information please visit the Ankarsrum Compability chart
Model information
There are two adapters, one long and one short.
The long adapter is used in conjuction with the dough hook and the short one with the dough roller.
Print instructions
100% infill/walls.
Manually place seam in the groove to not impact the inner dimensions.
You need to print with a material which can withstand some friction.
I used Add:north Adura FDA (PA6 Nylon) and it has held up fine the last couple of months.