ZX Spectrum Hardware Peripheral USB Stick Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to house the SanDisk Ultra Fit USB Stick and based on the Multiface Hardware Peripheral
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to house the SanDisk Ultra Fit USB Stick and based on the Multiface Hardware Peripheral this USB stick holder is the perfect addition to your new "The Spectrum". Best connected to the USB socket far right of the bank of three (as looking from the back) so it doesn't cover the other ports.
Top & bottom printed in black and the button in red, parts should be glued together and I've included guides to help it slot together correctly. I've also included a label which can be added to the top part and printed in white if you have a multicolour printer.
Printed in PLA using 0.4mm nozzle. Parts need to be laid flat before printing. Recommend printing at 0.08mm layer height for best results.