Fixdry Double-NT1 Desiccant Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact desiccant tray that can store loose silica gel beads and fixed inside the dryer
- Ocena
- 3 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact desiccant tray for the Fixdry Double-NT1 that can securely hold silica gel beads.
The gaps are about 1.2mm so small silica gel beads will not spill. This uses the 2 holes at the top of the dryer so mind where you will place it.
Required hardware are:
- 2x M3x12 bolts and nuts, or any size as long as bolt diameter is ≤3.2mm, length is ≤12mm, and nut width is ≤6mm.
- 1x M3x8 bolt and nut for locking the lid to the container. This will avoid spilling the silica gel beads in case the lid gets detached with the container. You may skip this if using silica gel packets.
I provided the step file so you can easily adjust the holes. See the images on how it looks assembled.
I printed in ABS as the dryer can reach up to 70° C (and maybe more when it offshoots).
Print without supports. It can also serve as a torture test to your printer😉.