Sovol SH02 PTFE tube coupler for PC4-M10 fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of the angled coupling adapter, which includes threads for a PC4-M10 pneumatic fitting.
- Ocena
- 4,667 / 5
- Polubienia
- 17
- Pobrania
- 206
- Wydruki
- 3
- Wyświetlenia
- 1067
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use the spacer from the original model and the nut from the original coupler. Consensus seems to be that most PC4-M10 fittings are either M10x1 or M10x1.25, so I've included both. Included the CAD file as well in case you need to adjust the threads, or for a different fitting.
I printed at 0.16mm layer height, with 8 walls so the part has no infill. You should be able to get away with printing it vertical and without supports but you may need to use a 4mm drill bit to clear any failed bridging in the centre. A high temperature filament like ABS/ASA (maybe PETG) is better, due to the high temperatures this will experience in the filament dryer.