Gridfinity Bins for Mitutoyo Digital Calipers (4in, 6in, and 8in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bins for storing three sizes of digital calipers made by Mitutoyo, compatible with the Gridfinity system.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 572
- Wydruki
- 0
- Wyświetlenia
- 1760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or models.
UPDATE 9/28/25: Added new model for 8" Mitutoyo 500-787 solar powered calipers.
UPDATE 1/4/25: I added more clearance to the jaw tips on the 6" caliper holder after I tried a brand new caliper and it was a bit tight. Apparently the one I originally used for test fitting had reground jaws.
UPDATE 1/11/25: Added new models for 4 inch caliper.
If you are unfamiliar with the Gridfinity system, watch Zach's original video below.
You will need a large printer to do these bins in one piece, but I have also provided versions cut into two halves which should fit on any printer. Note that these are not just a simple straight split, since some of the corners ended up with unsupported overhangs. I chamfered them so they should print without issues.
I used 0.2mm layer height with PETG. If you want a color contrast rim like I have, just add a color change at 41mm in your slicer.