Bird Buddy halo filter for small birds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My feeder is plundered by ring-necked parakeets. They come in numbers leaving only remnants for small birds. They act…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 455
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
My feeder is plundered by ring-necked parakeets. They come in numbers leaving only remnants for small birds. They act as bullies and can empty a full tank in less than a day.
I designed this to give small birds a chance to feed.
It's a halo you slide up from the bottom. Stretch it a bit to widen the part around the back tank part. It should fit snug quite easily.
I used 3mm diameter rods I kept from a previous project (found here on Amazon.fr).
- four are 100mm long for the sides
- two are 13mm long
- two are 15mm long
- the top one is 11mm long
Every rod is equipped with a foot to stand on the feeder's sides and a cap to prevent birds from being hurt.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
No
Supports:
Yes
Notes:
I use PETG for outdoor use durability and stability. Being less brittle than PLA it's also safer and less prone to breaking when you stretch it around the feeder.
Category: Outdoor & Garden