BaMaTech BaMaKey TP-III Magnetic Paddle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first 100% designed print - with magnets!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Everyone knows magnets are cool, so there are no less than eight in this design.
Please checkout the post on my website for a bit of background on the case.
Printed and constructed cases can be purchased from my shop.
Printing
As you can see from the filenames below, this has gone through a few iterations. The most important one was to ensure compatibility for paddles which may have different magnet polarisations (thanks to Markus for the tip!).
You will need the following (which can be purchased from various online stores):
- 8x 8x3mm round magnets
- 2x M10x2.5mm steel washers
If you'd prefer a kit, you can buy here.
When slicing, set your printer to pause at the following layers (please confirm these in your slicer) to place the washers and magnets. These layers are the last layer before they're covered over.
- Base: 20
- Cover: 105
Remember to polarise your magnets in the base and case so that they will attract and not repel.