Tough Airpods 4 Case (wireless and wired)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airpods gen 4 case
- Ocena
- 2,5 / 5
- Polubienia
- 31
- Pobrania
- 428
- Wydruki
- 5
- Wyświetlenia
- 1978
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
*There are two versions: one with the same design on the back, but which does not work with apple watch wireless charger, and another one with a thin back which works for wireless charging. ( tested it personally with apple watch wireless charger)
*You can use TPU for the 4 bumpers or PLA/PETG. Tested personally with TPU. Please clean them before trying to attach them. They have small tolerances to be sure they stay in, without the need of any glue.
*For the top part of the case, please use a small patch of double sided adhesive tape. Try to use the thinner adhesive tape you have and use it on the top of the airpods case.
*The case has a tight fit, to not need to use any adhesive for the bottom part, but not loose it either. If you find that is hard to insert the airpods case into this case, please check your calibration, or just lower the filament flow.