Filament reel insert (73mm Sunlu/ Jayo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lite (20g) insert lifts Sunlu (and other 73cm) filament reels above the MK4 extruder when printing tall objects.
- Ocena
- 4,5 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 180
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
When using the Prusa MK3/MK4 filament reel holder, this insert lifts filament reels with large centre holes up so that the Prusa MK4 print head does not clip or foul on the reels.
It's designed for 73mm diameter centre hole reels, which for me is Sunlu and Jayo plastic reels.
This insert is sort of a remix of / inspired by
https://www.printables.com/model/340779-filament-reel-insert
which does not work for me on Sunlu/ Jayo reels, just the one Geeetech reel I have.
The inserts inner diameter is 40mm which fits over the keeper on the end of the Prusa reel holder.
However this is in reality a total new design.
Its 20grams, prints for me in 1.5hours on the MK4
I used PETG to get a bit of flexibility when its inserted.
(If you do download and print, please do leave a make/ review good or bad; it takes time to post stuff on printables and its nice to know people have made use of that effort.
And if you do leave a bad review as something is wrong or your don't like it I get to learn from you and possibly fix it for other people. So don't hold back.)