Tool holder camping gas bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this holder is for the gas bottle key
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 14-12-24
i made the small one a little bit bigger and i added the tools it's self for printing.
For the tool you need PETG or better ASB ASA for strength.
i printed these with following settings
40% infill
4 top layers an 4 bottom layers
6 or 8 walls
-------------------------------------------------------------------------------------------------------
I made this is holder for the large double side tool from gok or other similar ( see photo ) so that i can't lose it in the caravan/camper or tent trailer.
Mount this near the gas bottle so that the tool near when it's needed and there are two hole so you can put a peace or string on it so in never fly's away or worse.
if you got the smaller one i got a scale down version of it.
it can be printed in PLA+ or PETG with 20% Infill and if you got a printer with good cooling you don't need supports.