Water Descaling Container for Faucets

This printable model is designed for descaling water faucets by attaching it securely using a cable tie. A TPU sealing ensures a watertight fit when filled with water and descaling solution. It’s a practical, DIY solution for maintaining clean faucets.

Included Files

• .3MF: Pre-configured for Bambu Lab X1C
• .STL: Universal files for 3D printing
• .SLDPRT: SolidWorks source files for adjustments or remixes

Recommended Print Settings for Watertightness

To ensure the model is watertight and durable, consider the following adjustments:

1. Print Quality Enhancements:

• Flow Rate: Increase flow to avoid line gaps
• Printing Temperature: Raise for better layer adhesion (avoid overheating to prevent bubbles)
• Seam Visibility: Minimize or randomize seams for less leakage

2. Mechanical Strength:

• Layer Adhesion: Reduce cooling for stronger bonding
• Wall Thickness: Use extra walls or high infill
• Volumetric Speed: Lower the maximum speed to avoid under-extrusion
• Top Layers: Add more for better sealing

Note: These settings may reduce visual appeal but significantly improve functionality.

Required Additional Parts

• 6x M5 Screws (minimum 25 mm length)
• M5 Nuts and Washers (use washers with seals if possible, or print TPU washers for custom sealing)

Community Contributions Welcome!

If you design faucet-specific seals or adapt the model for different faucet types, feel free to upload your versions on the platform. Collaboration makes this project better for everyone!

Enjoy printing and happy descaling. 😊