1 / 1
13mm LED clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip is 13mmx7mm and is meant for holding an LED strip such as one you would mount in a truck bed.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This clip is 13mmx7mm and is meant for holding an LED strip such as one you would mount in a truck bed. I ran out of clips for my truck and hope this helps someone, I didn't find any clips this large already uploaded. I made this out of PLA on a Prusa MK4. I used PLA just because that's what I have. Following advice on other clip builds, I built from the bottom up using supports (organic), NOT built on its side to avoid cracking.
Good luck, hope it helps someone.