Back Cover for Mamiya 645 Super/Pro/Pro TL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back cover for m645 Super, Pro and Pro TL. Tested with: - m645 Super - m645 Pro TL
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Back cover for m645 Super, Pro and Pro TL.
Tested with:
- m645 Super
- m645 Pro TL
Insert like the back, and press a bit from the top to make the “hinge” spring. Press too from top to remove.
Doesn't 100% follow body angles but it's better than nothing! Will probably look to improve that a bit.
Based and measured from the real cover with a few tweaks.
Printed with supports (tree), 0.4 nozzle and .28mm layer height, supports will be a bit tricky to remove but it's ok.
Provided is STL, 3MF and Solidworks file.
Note: The Solidworks part has been done with the Maker version and might only open in it, if needed another format that it can export, please let me know.