TP4056 18650 battery charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a…
- Ocena
- 4,762 / 5
- Polubienia
- 218
- Pobrania
- 1816
- Wydruki
- 23
- Wyświetlenia
- 6819
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I recently got hold of a couple of notebook batteries...
... So I needed a battery charge and test setup.
I build a charger holder around my battery booklet thing:
https://www.thingiverse.com/thing:4113164
This adds a piece for the TP4056 in front of the holder and some slots on the sides for the cables.
I put 4 of them next to each other on an old ATX power supply.
Also next to it two ZB2L3 modules also connected to the holders to discharge the batteries and measure the capacity.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.24
Infill:
10
Filament:
Das filament PETG Red
Category: DIY