Modular Keurig K-Cups Coffee Pods Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative modular rotating stand for Keurig K-Cups.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 120
- Wydruki
- 4
- Wyświetlenia
- 662
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular stand for Keurig K-Cups coffee pods. Each module contains 8 slots to fit 8 pods and can be stacked as high as needed! Each module spins individually and requires no additional hardware to assemble.
Printing Instructions (Standard):
I recommend PLA with 0.2mm layer height, 10% infill, 2-3 walls, and no supports. Each part is printed as oriented. Using 2 walls and 10% infill, each module of the stand is about 50 grams.
I have also included a test module that includes one slot to make sure your coffee pods fit before committing to the entire print. The diameter of each slot is 41mm.
A snowman topper is included for the holiday season that can be replaced with other toppers throughout the year. If you want to create your own topper, the dimensions of the shaft are 15mm diameter and 30mm long with a 2mm fillet on the bottom. I printed the snowman topper face down with no supports and colored it with acrylic markers.
Please comment with any questions or specific requests.
Happy Printing!