K3 10mm Door Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternate part for magnet if you do not source an countersunk one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The K3 door expects a paired set of countersunk magnets but it is actually non-trivial to source these in opposite polarities. I made my door with countersunk magnets so needed magnets on the frame side to attract them.
Odds are high that you will need to modify this part so I focused on uploading the F360 and STEP files. No STL, but if you have a modern slicer, you can open STEP.
Bill of Materials (BoM)
- 2 x M5 socket head bolts to attach to frame
- 2 x t-nuts of some sort on your frame
- 2 x 10x3mm disc magnets or similar, CAD it to accomodate
- Superglue to attach magnets to printed parts
Very easy to align to door magnet if the original K3 door DXF is used. Main problem will be thickness of your magnets and getting both sides to mate at just the right place so that the door can seal (after putting foam tape on).
Compatibility
I put it on my Voron Trident, I think it should work fine on a V2. Or pretty much with any 2020 frame for whatever you want to use it for.
Socket head M5 because I really prefer those, you can use something else but it may not fit well into the provided bolt hole. It's modeled as a Hole in Fusion, you can go in and change it easily.