Centrifugal fidget spinner (608 bearing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Centrifugal fidget spinner designed for 608 standard ball-bearing and 9mm ball-bearing-balls. 9mm balls are free to…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 506
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Centrifugal fidget spinner
designed for 608 standard ball-bearing and 9mm ball-bearing-balls.
9mm balls are free to move in the arms of the spinner;
when rotating, they are pressed outside. Once it slows down, when spinning vertically, they drop down again and make nice, clickery sounds.
Spinning horizontally is silent - depending only on the bearing you use in the middle.
Assembly: fill one to three balls in each arm and push bearing in the middle. It's an easy fit, due to the open arms. Once I had my bearing fine, I secured it with a drop of super glue.
Original CAD data can be found and reused in Onshape:
Tap for 608 - bearing "608 tap":
https://cad.onshape.com/document-redirect.html?d=/documents/e26c115415e3a61a40bfa7b1/w/01e075720ce131a2232920a2
Fidget Spinner itself "centrifugal spinner":
https://cad.onshape.com/document-redirect.html?d=/documents/cd5d6b5ee77e86217893983a/w/087f49fa1bbc9eb1fda428d9
Print Settings
Printer:
Anet A8
Rafts:
No
Yes
Resolution:
0.15
25%
Notes:
I printed 0,15 layer hights, 25% infill.
No supports needed for spinner.
The taps I printed upside down with supports, to have the nicer topping surface on the outside.
How I Designed This
Designed from scratch in Onshape Android mobile app.
Category: Toy & Game Accessories