Creality Pi Dryer Plus ( Dual Spools ) Heat Deflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deflects hot air from directly hitting the spools Filament . .2mm Standard , 2 walls , 2 top layers, 2 bottom.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 200
- Wydruki
- 3
- Wyświetlenia
- 1087
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
***** THERE HAVE BEEN REPORTS OF THIS DEFORMING FROM THE DRYER HEAT ****
please post in your comments what brand and type filament and Temp you are using
and ended up with a deformed warped deflector…
I have run my dryer 2 times so far with 60C for the temp for the PETG with CR-PETG
(Creality) filament and mine are still like they came off the print bed ..
Is this a filament brand issue ? ; dryer temp issue ?
Deflects hot air from from directly hitting the spools Filament .
Drops in , no tools needed .
3mf file from Creality Print 5.1
Manually blocked out supports on some areas
Images show the only supports i used.
Gyroid infill , infill density 15%
Detect narrow internal solid Infill checked on
Trees Auto , Organic
Skirt Loops 2 , height 1
Brim Auto
Printed in PLA on stock Ender 3 V3 KE