Hammer for theater productions and cosplays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight prop for cosplay or theater production
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The hammer is not functional it is theater prop, I made it lightweight with exaggerated hammer head to make it more noticeable on stage.
There is no any logos on the hammer.
Model has two separate parts (the head and the handle) you can change dimensions and material as you wish.
The hammer size is very close to maximum possible for my printer 250mm.
I added a little bit of tree support on the edge to be sure that it will be perfect. The support easy to remove without any trace.
Printing speed was reduced to be sure that overhangs printed well.
Prime tower was disabled because it wastes filament without a benefit for this model as a color changed only once.
Model parameters:
Height: 249.5mm
Width: 150mm
Height: 75mm
Layer height: 0.28mm
Strength: 5% of gyroid infill and 3 walls are good balance between weight and structural stability for non functional part
Colors: Black and Orange
Weight: 140gram
Happy printing!
P.S. If you are looking for the solution to reduce 3D printer noise, have a look on soundproof cabinet design, crafted from IKEA furniture. This cabinet reduces printer noise and ensures impressive 36.5 dB(A) at just 1 meter away. Detailed instruction how to build it you may find here