1 / 1
Prusa XL side spool holder (good for TPU, FLEX) NO SUPPORTS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa XL side spool holder (good for TPU, FLEX) NO SUPPORTS
- Ocena
- 3,333 / 5
- Polubienia
- 13
- Pobrania
- 120
- Wydruki
- 2
- Wyświetlenia
- 606
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (20)Powiązane
Printing soft materials like TPU or FLEX is problematic because the XL has a very long tube which causes friction and resistance of the filament. This is a quick and dirty solution before you can handle "normal" printing soft materials. Pull the tube out of the extruder and load the soft filament directly into the extruder (secure the sensor on the side of the printer with some old, short piece of hard filament to trick the printer). I recommend tool 1 to prevent the filament from tangling with the other extruders.