1 / 2
32mm Wardrobe Rail Hanger Set - Updated and Improved
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wardrobe rail hanger bracket for a 32mm OD pole (available in the UK from B&Q and in the USA from Home Depot)
- Ocena
- 0 / 5
- Polubienia
- 134
- Pobrania
- 343
- Wydruki
- 0
- Wyświetlenia
- 849
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Standard Digital File License
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (183)Powiązane
Easy to print, suggest ABS for strength with 4 surface layers and 25% infill.
Works really well with metal pipes which are nice looking and quite classy, but if you are on a budget, it also works with 32mm Outside Diameter (1 ¼ inch) plastic pipe which can be much cheaper..
If you want to use these with 32mm ID Plastic Pipe which is VERY cheap but has an outside diameter of about 42mm then scale up to 113% in your slicer.
New version has the following improvements;
- The side hanger is extended so that the top can sit up against the wardrobe top leaving the rail at the perfect height
- The screws are hidden by the rail
- A mid rail support is added which can be used if, needed to support long rails, or to piece together two short pieces into one long rail.