1 / 2
The Gang Insert/Organizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert/organizer for the board game "The Gang"
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 241
- Wydruki
- 2
- Wyświetlenia
- 1067
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (40)Powiązane
An insert/organizer for the board game “The Gang” with little filament use (~40g of PLA) and fast print time.
For cards, there are two slots in total: one for the playing cards, and one for the remaining cards. The slots can accommodate 100 micron thickness sleeves (tested with Gamegenic Standard Matte 66x91).
The chips go on the side trays.
To take the insert out, use the grip holes on the walls of the playing card holder
All trays and slots are embossed with texts indicating what to put in there.
Print settings for the insert:
- 0.20mm layer height (lower the layer height for better embossed texts)
- Sparse infill: 15%