1 / 2
Nightblood with 3.4 x 12.8 mm (1/8" x 1/2") Support Channel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated the Nightblood model to support self indexing square bar instead of threaded rods and pins.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Using the additional 0.1 mm offset for the support channels allows for easier assembly with PETG filament. The offset has been baked into the channel cuts. The 3.4 x 12.8 mm (1/8" x 1/2") mild steel bars can be found at your local hardware store.
