The alternative for lid risers for Qidi Plus 4 & others to protect the PTFE tube to the print head.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a protector for the PTFE tube to the print head and for the lid.
- Ocena
- 4,833 / 5
- Polubienia
- 74
- Pobrania
- 389
- Wydruki
- 3
- Wyświetlenia
- 2683
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I'm using my Qidi Plus 4 very frequently. After a short time I have recognized that the PTFE tube to the printhead was somehow “sanded” by the lid and smeared the lid itself. To print a lid riser I was not motivated enough, so I have modeled this small PTFE protection helper. It is in use now for several weeks and has no abrasion on top at all. Even the lid glass is not smeared again. Maybe it is helpful for you as well.
I have printed it with Qidi ASA and standard values for this filament.
I'm looking forward for your comments: does it work for you as well? Thx!