1/2" adapter for can opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got a can opener and a 1/2" impact gun? Let's get that can opened.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
When the can has no pull tab on it (so not the one in the pictures) the can opener is a great tool, but turning it by hand is slow. An impact wrench is fast. Now my cans open in seconds.
I thought of making it to be used with a regular hex-drill, but for the forces required it seemed like the easier task to use the ½" socket mount of an impact wrench. This way the layers can be oriented however we want to and it still is more than solid enough.
I printed mine with the socket side down and a bit of support. 8% infill, 2 outer layers, pla and everything is fine.
My can opener is from the Rewe supermarket, so on other makes it might be harder to keep it centered.
Have fun!