1 / 5
Spacers For Recreator MK6 With Chunky Ender 3 PSU — zdjęcie 1
1 / 5

Spacers For Recreator MK6 With Chunky Ender 3 PSU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacers For Ender 3 PSU to make the main-board fit & to move display about 5mm forward

Ocena
0 / 5
Polubienia
7
Pobrania
23
Wydruki
0
Wyświetlenia
259
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Spacer for MK6 Ender 3 PSU to make the mainboard fit with the chunky Ender 3 PSU because the original model was modeled after the skinny Ender 3 PSU.

Some side notes 

you have to download all other parts from the link above this model uses all the original screw holes to mount the spacers with the added holes in the back so the original instructions should work with this & in the image from my cad the grey parts are the unchanged parts where the red is the changed ones

 

Changelog

V1.1 Designed spacer and modified back plate to be taller to accommodate the spacers and to work with the extrusions and use all of the original screws and work with all display mounts.

V1.2 added a spacer for the screen mount because the chunky Ender 3 PSU is slightly taller than the slim one.

V1.3 made a 2nd version of the display spacer that screws into the extrusion like the back plate using m4 screws and t-nuts.

V1.4 fixed the small gaps in the new display spacer.

V1.5 Fixed and redesigned the v2 version of the display spacer to make it fit perfectly with the other spacer and the extrusion