Ruger Precision Rimfire Extended Mag Release (.17 HMR and 22 WMR only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended mag release for .17HMR and 22WMR.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This will only work for the .17hmr and 22WMR models only. I designed it to fit my .17hmr and I believe it should work for the 22WMR as well but I can not confirm that. Let me know if it does not work. WILL NOT FIT THE .22lr MODELS.
For 22lr refer to this model by CrackFox.
This model was heavily based on the one by CrackFox but was adapted to work with .17hmr and clean up a few things.
I recommend you print this in petg with high infill (30-60% at least) I did 45% infill.
You will need an m3 nut and 12mm m3 bolt to hold the lever in place. Install the nut before you put the mag release assembly in place and put the bolt in after you bolt the upper back into the lower receiver.