1 / 2
Terminator Station lid key — zdjęcie 1
1 / 2

Terminator Station lid key

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Key to turn the top of the Terminator Termite Bait Station to open and close it.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The Terminator Station that I found on thingiverse (https://www.thingiverse.com/thing:6040426) was the most developed termite bait station I could find, but it seemed a bit of an omission to not give any particular instructions about how to open and close it. I initially used a screwdriver and some excess force, breaking a few lids, but this key should more or less allow more precise control opening and closing the top

I printed this flat so that the nubs that go in the holes wouldn't just shear off at the layer lines


 

Brim as pictured is probably not necessary, I just like to use it.

Probably not necessary to follow what I did here, but I did PETG 0.2mm layers, 4 walls, 6 top and bottom layers, 25% gyroid infill