1 / 1
Peroxide Bottle Cap w/ 3/16" barb fittings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was created to dose peroxide from a standard bottle using a peristaltic pump.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Public Domain
This was created to dose peroxide from a standard bottle using a peristaltic pump. Because it is used for fluid it would be wise to adjust your slicer to Wall loops “6”, Top shell layers “6”, Bottom shell layers “6” and 50% infill.
It is set in the correct printing orrientation and needs to be printed with supports default settings for tree supports within orca slicer will work. I would recommend changing the interface pattern to “concentric”