1 / 6
Sponge can for kids blackboard (Schwammdose fuer Kindertafel) — zdjęcie 1
1 / 6

Sponge can for kids blackboard (Schwammdose fuer Kindertafel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have designed this sponge can because the one came with the blackboard of my son broken. The can is for the sponge…

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I have designed this sponge can because the one came with the blackboard of my son broken.

The can is for the sponge it will be hold by the sharp edges. The cover is screwed together with the can that the sponge will not dry out.

In my pictures you can see how it is used.
STEP file is provided!

German Version (Deutsche Version)

Ich hab diese Schwammdose entworfen, weil der Deckel von der ursprünglichen Version welche mit der Tafel zusammen kam, kaputt gegangen ist.

Die Dose ist für einen Schwamm, der durch die scharfen Spitzen gehalten wird. Der Deckel lässt sich auf die Dose schrauben, damit der Schwamm nicht austrocknet.

Auf meinen Bildern kann man die Anwendung sehen.
Habe die STEP-Dateien dazugepackt

Print Settings

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%

Filament: 3D Jake PLA Black / Orange

Notes:

Designed to be printed without support, but your printer should be calibrated.

German version (Deutsche Version)
Entworfen um ohne Support zu drucken, aber dein Drucker sollte kalibriert sein

Category: Parts

Tagi