Variable Size Cuvette Holder for Perkin Elmer Lambda 365 UV-Vis Spectrometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variable size cuvette holder for Perkin Elmer Lambda 365 UV-Vis spectrometer with magnetic fitting.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Share Alike
This cuvette holder was designed to fit in a Perkin Elmer Lambda 365 UV/Vis spectrometer for single and double light path measurements with cuvettes of variable path length of up to 100 mm.
It can easily substitute the standard Single Cell Holder by removing the metal screw shown on the pictures. On the bottom side, four magnets (8x2mm) are installed for attaching the holder in the correct position.
The print was performed on a BambuLab A1 printer using BambuLab PLA Basic (black) with 0.2 mm layer heights, 3 wall loops, 10% gyroid infall and the seam set to “Nearest” (to avoid seams directly at the light path channels).
Notice that PLA is not stable against a wide range of organic solvents, e.g. acetone, ethyl acetate or dichloromethane. Be careful not to spill any organic solvents on the cuvette holder as it might dissolve and may damage your cuvette. No responsibility is taken for that, use on your own risk. For more chemically resistant filaments, please inform yourself.