Pelonis Electric Oil Radiator Heater Replacement Power Switch Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The power switch knob on my Pelonis HO-0264 radiator heater broke. This knob replaces the original power switch knob.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The power switch knob broke and was spinning in place so I modeled this replacement knob. The shaft diameter is 6mm and there's a 1mm tall flat on the shaft. The knob is shaped with an arrow pointer angled in the same direction as the stock knob.
Dissassembly note for the heater: The knobs don't pull straight out. There's a flange on the knobs to prevent them from being pulled out from the front. The side panel unscrews with one large Philips head screw from the outside and the plastic fascia holding the knobs in place is a smaller Phillips screw on the backside of that side panel once the assembly is pulled apart an inch or so. This small screw needs to be removed and the plastic fascia can then be removed completely. Once the knob is removed, everything can be put back together in the reverse order. The new knob will press onto the switch shaft once everything is assembled.
