Exploring the Volume of a congruent Pyramid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,15 € – 3,85 € netto (bez VAT)
Dla pliku: DONT_USE_THIS_volume_of_pyramid_60p3_0.6n_0.32mm_PLA_MK4IS_2h6m_DONT_USE_THIS.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,50 € netto (środek widełek).
- Masa podana przez autora
- 73 g
- Czas druku podany przez autora
- 2,1 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
With this model, students can explore the volume of a congruent pyramid in comparison to a corresponding cube.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Public Domain
With the two provided models, you can print a shell of a cube (60mm)³ and at least three congruent pyramids. For understanding purposes, it is suitable to print the shell with a clear filament. The pyramids are best printed in a different color for each pyramid.
To reduce print time, a 0.6mm nozzle is recommended. When printing with PLA, ensure good cooling during the printing of the pyramids. Printing multiple pyramids is helpful in case the print of a pyramid fails.
Mit den bereitgestellten Modellen können die Hülle eines Würfels (60mm)³ und mindestens drei passende kongruente Pyramiden gedruckt werden. Um den Verständnisprozess zu fördern, sollte die Würfelhülle mit einem transparenten Filament gedruckt werden. Für die Pyramiden sollte für jede ein andersfarbiges Filament verwendet werden.
Eine 0,6-mm-Düse wird empfohlen, um die Druckzeit kurz zu halten. Beim Drucken mit PLA sollte während des Drucks der Pyramiden auf eine gute Kühlung geachtet werden. Das Drucken mehrerer Pyramiden ist hilfreich, falls der Druck einer Pyramide fehlschlägt.