1 / 6
Sovol SV08 7inch screen mount — zdjęcie 1
1 / 6

Sovol SV08 7inch screen mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

just a screen mount for the sv08 since there wasnt one that would work for my screen

Ocena
0 / 5
Polubienia
13
Pobrania
50
Wydruki
0
Wyświetlenia
626
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

ok so first off the main brace  that mounts to the sv08 itself  is from  tommy gun on makers world  can be found here 

https://makerworld.com/en/models/533584#profileId-450393

i just added a mount for the 7 inch screen i got  also link can be found here for screen

https://www.amazon.ca/dp/B0CTB84SKW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

i went with the 7inch cause some ppl said 8-10 was abit blown out on screen  plus with the 7 inch u can drill the mounting hold  abit lower on the mounting bracket and lower it far enough to  still open and close the doors on the encloser if ur useing it 

 

printed on the sv08  with brim on the screen holder part  takes about 2 hours  at 300mms   for both parts together  so about a hour each 

printing in matte black pla

2x m3x10 screws and bolts 

2 round peices of velcrow to hold screen