1 / 5
Sound Blaster X G6 Below Monitor Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
yet another mount for a Sound Blaster X G6, but this time it affixes to the back and below my Iiyama 34" monitor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Mount using some double sided tape. I recommend nano- or gecko-tape. The ledge on the monitor will carry most of the weight, so the double sided tape is really just to keep it in place.
Printed fine with 0.6mm nozzle at 0.30mm layer height. I used black Extrudr XPETG Matt, but any material should be fine.
The model is parametric, so probably easy to adjust for any monitor. Might even fit other monitors as is.