1 / 1
Ergonomic Selfie Handle for Manfrotto MH494-BH
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic/heavy duty selfie stick for mirrorless/DSLR cameras. Compatible with Manfrotto MH494-BH.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This handle is designed to take the Manfrotto MH494-BH quick release socket. It allows you to reach further out for wider selfie shots.
Hardware Requirements
- (1) M6 nut – should have an inscribed diameter of 10 mm.
- (Optional) A bluetooth or an infrared remote that works with your camera.
Print Settings
- Min. 6 walls.
- Min. 5 top shell layers.
- Min. 5 bottom shell layers.
- Min. 10% infill.
- Print on its side.
Installation
- Separate the Arca swiss socket from the MH494-BH ballhead unit using a 4mm hex key. Save the original M6 bolt as you will need it in Step 3.
- Insert the M6 nut into the bottom slot of the selfie stick.
- Place the socket on the top side of the selfie stick and secure it with the M6 bolt. Be careful not to over tighten and break the plastic. Cameras only weigh 1-2 kilograms at most, and the bolt does not need to be that tight.