1 / 1
Durston Z-Flick Tent Pole extender for Astagear yun chuan 2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Durston pole extender
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
The durston roads are not enough long for the astagear yun chuan 2 tent. So I made an extender for both sides. Printed with 100% infill, from ABS but PETG is good to. After the print I heated up the modell with a hairdryer, and pushed to the 2 ends of the durston roads.
It increases the height of the pole with 2x2.5cm.