1 / 4
B18 (2020-) Nissan Sentra intake for K&N filter — zdjęcie 1
1 / 4

B18 (2020-) Nissan Sentra intake for K&N filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A performance intake for 4" K&N filters

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

This is a short ram intake for a B18 Nissan Sentra 2.0, it has the correct port for the MAF sensor and a 8mm breather tube for the PCV hose which is for the people who can't get the original size rubber hose, I also made said adapter. I've made several iterations to make it fit okay, since I don't own a 3D scanner for now. This is the v4 version, with the tilted MAF sensor mount so it doesn't hit the hood.

These new-gen Sentras are peppy little sedans, and honestly, I like how the intake sounds now. Performance-wise, I don't have numbers since I've never been to a dyno before, but I can defenitely feel a lil' more oompf from the MR20DD.

I've been using mine for ~9000km (~5600 miles for hamburger people) and I've had no faults involving it, and I'm not particularly kind to the car: lots of revs and hard accelerations, idling a lot on hot weather, a trip to the beach... you name it.

For added protection, wrap the intake tube with aluminum foil tape, gold tape might be a bit overkill but it's better nonetheless.

The scope of this model-project thing is to make a full cold air intake using the stock path or a better one, but the first one will defenitely be using the stock path. So stay tuned, people.

 

IMPORTANT!!! You'll need a 2.73" to 3" silicone adapter to fit the intake to the stock throttle body as well as an 8mm hose for the pcv adapter.

 

Printer settings:

  • 50%> infill, triangles
  • 3 walls
  • zigzag tops and bottoms
  • Tree (organic) supports at 40° (50° if you have a good printer)
  • ASA filament I personally like ESUN
  • 0.4mm nozzle
  • 255°-265° nozzle temp for good layer athesion.

Tagi