Candlestick with Poinsettia Motif
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Candle stick for holding LED Votive Candles.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It holds 1.82" H x 1.4" diameter LED candles (4.60 CM x 3.56 CM) that are available at Target.
The bottom does not require supports. You may want to consider using supports for the top to get a better print than I did. I printed with Bambu Lab PLA Matte Desert Tan on a Bambu Lab A1 printer at .2 layer height and infill printing before perimeter.
12/13/2024 - Tried printing with different settings and filament. One setting I did not change, but in hindsight, maybe I should have changed was the “Wall Generator” setting, from “classic” to “Arachne.” This may have prevented the outer bulge at the inner floor layers. I did not print with supports. I'm pretty sure the bulge won't happen on a Prusa machine.
The bottom was printed with Inland High Speed Silky White PLA. The top was printed with FormFutura High Gloss PLA ColorMorph Gold & Silver.
2/28/2024 - I was able to get a good print of the top (without motifs) by printing it upside down with supports. See my blog post for more information.