Tube shelf stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To make sure the tubes in a shelf is at a 90 degree angle
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
So the wife bought an outside kitchen shelfing unit from Temu or something. And yes, it is as crappy as it sounds.
The problem is when it get some load on, it starts to lean over. Mostly beause of the crappy wheels/feet, but I also noticed the tubing is not at a 90 degree angle either.
So, the wheels went into the garbage, and I created a little something to make sure the tubes are in that 90 degree angle. And I alse needed new feet for it… https://www.printables.com/model/621426-planter-pot-lion-foot
The tubes are 16mm in diameter.
Printed in red PETG (because it christmas) with 0,6mm nozzle at 0,4mm layerheight.