Geometric Origami Inspired Christmas Tree /w Tree Topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modern Origami-inspired Christmas Tree with Tree Topper
- Ocena
- 4,9 / 5
- Polubienia
- 111
- Pobrania
- 538
- Wydruki
- 10
- Wyświetlenia
- 3558
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This elegant Christmas tree combines minimalist design with origami elements.
The tree's geometric folding pattern creates a clean, modern look. It consists of six tiers that gradually taper upward and can be crowned with a tree topper. It's very easy to print, and you only need some glue / double-sided tape to fix the star halves in place.
It can also be printed in vase mode, but I would recommend using a large nozzle.
Size: 18,5 x 30 cm (can be scaled to your liking, don't forget to scale the tree topper as well)
Weight: 156 grams
Print time: 10 - 12 hours
Note: When printing in vase mode, the star might sit loosely on the tree. A small amount of glue can easily fix this.
Happy printing & Merry Christmas
Non-commercial use only.
Print settings
Perimeters / walls: 2
Layer height: 0.3-0.6 mm (depending on nozzle size)
Infill: 0%
Top layers: 0
Bottom layers: 5-8
Print speed: 35 mm/sec
Optional: vase mode enabled