Ableton Move Stand V2 + Carry Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desk stand and an optional carry handle for Ableton Move
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple and sturdy 25 degree desk stand and an optional carry handle for Ableton Move.
Designed for multicolor printing, but you can easily edit the logos out in the slicer if you want single color prints.
UPDATE, 6.9.2025: If you're not able to print this yourself, you can buy a single color non-logo version now from Portals by Slant3D here https://teleportpod.com/portal/3c9594d6-1c21-450d-8daa-24e36803f571?item=253
V1: Looser middle bar dovetails to ensure good fit with less accurate printers, use glue to secure. No need for supports. V1 is the black version in the images.
V1 FIX, 19.2.2025:
The Ableton logo in the right end was accidentally mirrored, this is now fixed and the model is replaced.
V2 + Carry handle, 20.2.2025:
Middle bar dovetails fit tightly and optionally you can use M3x12 screws or glue to secure it in place. Optional middle bar compatible with the carry handle. V2 is the white version in the images.
Carry handle clip can be slided from the end or clipped straight on depending on how stiff your material is. Slide the carry handle to the clip dovetail and secure with an M3x12 screw or glue.
Added Carry handle phone holder edition 4.3.2025:
Fits max 13mm thick phones
Resize footpads to 98% of original size in the slicer so they fit well and doesn't need glue or use your own footpads.