Prusa MMU2S horizontal frame mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative frame for the MMU2S to attach to a Prusa MK3 frame to keep the unit horizontal with low vertical height.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 149
- Wydruki
- 2
- Wyświetlenia
- 616
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This design is based on the clips of the original MMU2S frame attachments, but I needed a frame that keeps the MMU horizontal and as low as possible. I have a height restriction due to the limited space in the IKEA enclosure.
The part is printed in PETG, prints flat without supports and makes use of the same M3 SHCS screws to attach to the MMU2S.
(The selector on my MMU2S is also a combination of ideas and improvements from others to prevent load failures and other problems. I will share the design in the future.)