Yoto (Mini) Case Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup holder insert for use with the Yoto mini case remix from setapart2.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cup holder insert for use with the YOTO Case remix by setapart2. Has slots for 10x cards behind the Yoto and is hollow in the base to allow for additional bulk card storage (and also to reduce filament use).
There is a little slop when the case is inserted so that children can insert it easily, but if you would like a tighter fit you can probably stick some electrical tape in for some more friction.
I printed in ASA for use in hot Texas summers and used painted tree supports for the corners sticking out from the cup portion. I would suggest 4+ walls so that the space between the outer wall of the cup and the corners of the hollow space are not hollow.
Step file is provided for folks with different cup holder specs.
Filament is Dolos Color Shifting Prince of Purple ASA from Ambrosia (make sure to dry the roll before printing, but otherwise it's a great filament!).