Lego Razor Crest UCS 75331 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secures the Razor Crest to the wall without requiring the set to be modified in any way.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 490
- Wydruki
- 0
- Wyświetlenia
- 2838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Secures the Razor Crest to the wall without requiring the set to be modified in any way.
Because the top panels and canopy are not secured very well on this set, I would highly suggest hanging the set on the wall without these panels installed, then once the ship is on the wall, attach the panels. The canopy is a bit tricky since it doesn't attach with any studs at all.
I've tested the mount to hold almost a hundred lbs without any signs of stress, much more than the set itself weighs.
It also has a recess on the underside for a 2x2 plate to be wedged in on the bottom for you to hang your plaque and minifigs as I have.
The pins are driven into place once the two main pieces are connected and behave like locks to prevent the two pieces from shifting. In my testing they never moved, but I just wanted the peace of mind knowing they were mechanically secured.
Here's me testing how secure the attachment method is during testing.
Printed on a Bambu X1C - PLA 15% infill - 4 wall layers