HueForge M.C.Escher_The Palace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Palace as HueForge with 2 or 5 Colors
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
The Palace as Hueforge
with 2 Colors at the right (goes much faster but dont look so nice)
or with 5 Colors at the left(need longer but look better).
The Palace 2 Color
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 161.86x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 2mm and the Actual Depth is 0.92mm
Filaments Used:
PLA Geeehtech Matte Dark Gray Transmission Distance: 1.5
PLA Elegoo White Transmission Distance: 3
This print uses 2 unique filaments
Swap Instructions:
Start with Matte Dark Gray
At layer #6 (0.6mm) swap to White for the rest.
The Palace 5 Color
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 161.86x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 2mm and the Actual Depth is 1.3mm
Filaments Used:
PLA Crealty Matte Black
PLA Geeehtech Matte Dark Gray
PLA Elegoo Matte Gray
PLA Geeetech Bone White
PLA Elegoo Matte White
This print uses 5 unique filaments
Swap Instructions:
Start with Matte Black
At layer #5 (0.52mm) swap to Matte Dark Gray
At layer #7 (0.68mm) swap to Matte Gray
At layer #9 (0.84mm) swap to Bone White
At layer #11 (1mm) swap to Matte White for the rest.