1 / 1
FRC VH-109 Radio Mount (Team 4980) — zdjęcie 1

FRC VH-109 Radio Mount (Team 4980)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The FRC VH-109 Radio can be mounted to a robot and easily removed by loosening the 4 retainer tab screws.

Ocena
0 / 5
Polubienia
7
Pobrania
83
Wydruki
0
Wyświetlenia
383
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is a mount for the FRC VH-109 (WCP-1538) radio. There are two versions, both of which are designed to mount on a 2"x1" box tube extrusion with predrilled holes. For the first, the mounting holes are on the 2" surface of the extrusion. For the second, the mounting holes go through the 1" side of the extrusion. Both options have an open back so that the radio can be mounted against metal for heat dissipation as recommended by Vivid Hosting. The retaining tabs are designed for M3 heat-set inserts for durability to make frequent removing of the radio easy. The included retaining tab (common to both options) is blank so that you can add your own team number. The mounting holes allow using #10 or M5 (a little tight) screws.

Required Parts (less mounting screws):
4 - M3 x 8-10mm screws
4 - M3 x 4.5mm x 4-6mm heat-set inserts

Print Settings (MK4S):
   Filament:   PETG
   Layers:   0.2mm, 3 perimeters
   Infill:   Grid at 30%
   Supports:   Organic (not needed for retainer tabs)

Update 1: V1: I updated the current model mounting holes for a 2"x1" box tube extrusion with predrilled holes in a 0.5" pattern. I created a second version with mounting tabs on the side of the box tube extrusion.

Update 2: V1.1: The change from V1 to V1.1 is a minor clearance change around the radio. When we received the actual radio I found the fit a little to tight for my taste.

V1.2: For the split bracket, we found that the bolt heads could not be reached due to interference from the Roborio. Since the bolt hole was designed to fit thru from one direction I added a notch for power connector clearance to the split bracket 2 to allow the brackets to be reversed. 

Tagi